2m 59s | 756073 view | 638 rating

Learn more about the DR TreeChopper here: http://www.drpower.com/prdsell.aspx?Name=treechopper Join us on Facebook: http://www.facebook.com/drpowerequip Did you know that one of these invasive cedar trees will soak up 32 gallons of water every day? If one tree can consume that much water, imagine what hundreds, or thousands, of them can do to important grassland across the country? Water is not available for livestock, wildlife and citizens...Soil is depleted of nutrients...and overgrowth robs ranchers and farmers of valuable space and productive range land. In fact, in the U.S., over 700 acres a day are lost to invasive tree species! Good land management practices call for early intervention and DR Power Equipment has the solution! Introducing the DR TreeChopper, a low-cost and effective way to control nuisance trees. The TreeChopper is designed to be used on just about any 400 cc or larger ATV with 4-wheel drive. Once it's installed to your vehicle's frame you can hook up the TreeChopper in just minutes, by removing two pins. You'll want to start with some smaller trees to get a feel for the machine. Select a 2" diameter tree and clear the area of debris. Approach the tree slowly to line up the Tree-Chopper's blade on each side of the tree's trunk. From 6 to 10 feet away, accelerate up to and right through the tree. It will take some repetition to get efficient, but you'll pick up speed as you go. Eventually you'll be taking out trees at a rapid clip, and you'll be ready for trees up to 4" in diameter and up to 6' high. With experience, you'll be able to cut hundreds of trees an hour! The DR TreeChopper is designed to cut trees off smoothly at ground level, leaving no jagged spikes to injure livestock. Over the last 10 years, this machine has been used successfully by the Bureau of Land Management, the U.S. Forest Service, conservation groups, and hunting and snowmobile clubs across the country. Your satisfaction is guaranteed with our 6 month hands-on trial.