Machines | how to put a tube in a tubeless tire
videos | at work | information | view | construction
had a tractor with cracked side walls, here is how l fixed it
Comments
-
hi , can i put a tube in tubeless tire of my honda activa scrooty...pls help me
-
very helpfull
thank you -
I am a new subscriber and have been enjoying your videos. A cool tool you MUST get for tube changing is one that is a 6" cable with a T handle on one end and a heavy duty valve stem cap on the other. Thread the cable through the hole, attach the valve cap to the tube and pull the T handle to work the stem into the hole. WELL worth the $5. Thanks for sharing your knowledge.
Fred Ontario, NY -
Thanks. Very informative. I am going to try it on a wheelbarrow tire.
-
highly unlikely those that have that equipment need inst on how to use.
-
those honda tractors look nice and sound great on paper. But just looking at those wheels is a perfect example why I'd never buy one. There are probably 3 parts on the tractor that were used on other honda only equipment, and even then if you win the lottery and the honda dealer has them in stock, have fun paying out the ass.
-
Vice grips on the valve stem. That explains why my valve stem was all chewed up when I had the tire shop tube my tire.
-
That tire needs to be replaced, why not replace it ???? Sooner or later it has to be done !!!
-
Hi my inner tube dont fit the tire i don't know, the tire looks wide my size is 18x9.50-8
-
thank you for the tutorial, saved me a ton of headache trying to get a new tire/tube on
-
Ken Tools makes an affordable set of tire tools, about $35. with shipping on Ebay.
-
Oh man! I wish I had known about putting a few pounds of air in the tire 40 years ago, before trying to break the bead. I built one of those bead breakers in high school shop class around 1972. All I had to go by was a grainy illustration in a J.C.Whitney catalog. I expeirenced much "smooshing over" of the sidewalls, instead of the bead breaking properly. I got it to work a few times but eventually, it got relegated to the corner and after years of kicking it around, I threw it out. Now, I'm too old and knackered to change my own tires. Oh well. Great channel, mustie!
-
Awesome video man! This will help me greatly when I go to put my tube back into an atv I dismounted the tires from in order to slag blast the wheels and refinish them. But lo and behold, one tire had a tube. And I was .....ugh..... But now I should be alright
-
use a ton of baby powder on the flat inner tube and inside the tire. it makes the process a lot smoother.
-
very helpful. thank you.
-
Slime does not damage the new slime keeps rust gone.
-
Thank-you. Putting the tire on a work area higher up would be better. I felt worn out watching you struggle with the tire on the ground.
-
man your in pretty good shape man!
-
i put a tube in a 20x8.00 Carlisle tyre on ride on mower,,tyre pressure was 10 psi max. now with the tube in do i go to 10 psi,,i did pump up tube prior to putting in tyre and 5 psi the tube felt like it would burst.
-
Thank you for posting this. It was extremely helpful to me in restoring a wheel barrow that was many years old and in pretty bad shape. I obtained the tube at Home Depot, and just followed your instructions, without which I would have had to bring the tire to some repair shop and paid more money. I also enjoyed your "show and tell" story. Who would have thought when you were just ten years old that someday you would be making a similar presentation to the "world".