Machines | Homemade Solar Panels Diy tutorial, complete build
videos | at work | information | view | construction
In this video I'm showing you how I built some solar panels from start to finish I tried to make it as detailed as possible. These panels cost me very little to build and are fun projects for everyone. This is just one way of doing this there are lot's of others doing this and good videos out there. Presently I'm using my panels at a job site where there is no electricity available they are running my RV off the grid. These panels are not encapsulated but they work well and low cost not for on roof installation best to be close to ground for inspection.
Comments
-
got my interest.. can't wait to start this project.. thanks for the video..
-
Thanks for taking the time to do this. It was very informative!
-
what do you ask for, when buying these raw cells?
-
Good video, thanks
-
you say they are very delicate but you pile all your materials on top of them???? you didn't show noting but how to destroy other panels to just stick them all back together. in which you still didn't give a good presentation. so destroy a shit load of solar lights just to sadder them back together.... weird and a waste of time.
-
I was build several panel in this manner or slightly different. All of them suffered from same problem - over heating due to green house effect and melting all soldered points. I try on different approach, and my conclusion is: Without EVA film encapsulation or resin filling ( what is extremely expensive) it is impossible to build durable panel.
-
>>How to Slash Your Power Bill by up to 75% (or more) in less than 30 days - Guaranteed!>>>[ https://www.facebook.com/DIY-Home-Energy-1607656416206247/?sk=app_190322544333196=fguj-xcvr4 ]..........
-
Very informative! Thank you for sharing!!
I want to try to build it. I have one doubt though. Glass seems to be very heavy as a frame. The only alternative I can think of is plexiglass, but then I'd have to have a heavy wooden base to prevent cells from moving. Have you tried other materials for the base/frame? -
half an hour...
-
Talk about beating around the forest....jeesuss
-
me sola ekka hadana vidiya sinhalan nedda ane help plzz
-
Brilliant.
-
Don't waste your time making your own panels. Factory made panels are
cheaper at less than a dollar watt. You can even find factory panels for
32 cents a watt. Making your own panels is ridiculous and a waste of
your time and money. -
Hi could you please respond to this comment please? I want to make homemade solar panels connected to a factory made fan for my school science project. The example of a fan I am looking at requires a minimum of 56 watts to be powered. Could you please give me an exact list of what I need and more specific directions. After watching this video I'm still confused.
Thank You! -
Damn it dude I"don't want to f**cking see you explaining how to put them together I'want to see you build one of those cells from scratch!
-
DIY is dead and gone, SUNGEN panels for under 40 cents a watt http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575119394&toolid=10001&campid=5337663844&customid=Solar+panels+100+watt&icep_item=171847674560&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg 100 watt high volt Amorphous
-
hi. can someone help me to identify the new or old solar pallets if l buy the used solar pallets?
-
Why is soLder called Sodder ? It does have an L right there in the middle.
-
They need to be encapsulated to provide an oxygen barrier.