Machines | CNC Lathe Crashes
videos | at work | information | view | construction
he problem in the 1st one was the original program was for a piece of 120mm dia stock this piece was 125mm I changed the program so it didnt take a 5mm cut but forgot change the retract so it turned it down to 123mm then rapid in to 120mm and back 150mm. The problem in the 2nd one is the machine has a 4 station auto toolpost and tools get swapped about abit that means certain tools are not in the same position as the last time the program was run and I forgot to edit the program tool numbers resulting in a boring bar that thinks its a grooving tool.
Comments
-
You coolant must smell like rotten shit by the looks of it
-
Ghost CNC....
-
Mondays... :D
-
Hahaha! Bad day at work.
-
You're useless man. If you're in doubt what's gonna happen (which you shouldn't) Then turn down the feed and see what the machine does.
-
There are two kind of machinist. Those that had a major crash and those that will have a major crash. Any other type are not machinist, they are dilettantes.
I take it there is no hydraulic chuck, because first one didn't even break tool that badly. -
what an idiot
-
lmfao... i died on the second one. i hope this was on purpose.
-
put your hands up and step away from the bong. wow!
-
Crashes happen.
-
what the actual Fuck...
-
Thanks for posting. At least you have the minerals to show mistakes. You and me BOTH know that this stuff happens, everyone else just edits it out.
-
Why would you post this??
-
Believe the tool is supposed to back off the part first before rapiding out. Yep Yep someone tried to start a boring bar op at the finish diameter. God damn some folks don't seem to know how to dry run a program first XD.
-
That is an expensive and very silly mistake...
-
This is why i run a manual lathe.. Pure manual machienest. .
-
for fun?
-
Too dangerous, no motivation, go to shipping job now!
-
Single block, SINGLE BLOCK!!!
-
these things happen. i rammed a facemill straight into hard jaws before. i was deaf afterwards and blind from the sparks, and totally embarrased lol